Mining equipment parts, made in Canada.

Large components to close tolerances. From your drawing or the worn part, to OEM dimensions.

Get a quote
Two haul trucks on a bench of an open pit gold mine in Quebec

Why manufacture in Canada

How we choose our shops
Canadian-owned shopsMany of them family businesses, British Columbia to Nova Scotia.
Your IP stays in CanadaDrawings used only for your parts. NDA on request.
Inside your trade agreementsOrigin documented for CUSMA, CETA and CPTPP.
Your standards, your unitsASTM, SAE, ISO, CSA. Inch or metric.

By equipment

  • Metso and Nordberg crushers

    HP300 · C106 · C120 · HP200 · HP400 · GP300 · NP1213 · Lokotrack LT106

    Square head liner bolts, head and eccentric bushings, countershafts and keys, protection and side plates, shims and spacers

    Parts by model →

  • Sandvik crushers

    CH440 · CH660 · CS440 · CJ412 · QJ341 · QH441

    Spider and eccentric bushings, main shaft sleeves, keys and retainers, shims, frame bolts

    Sandvik CH440 parts →

  • Symons cone crushers

    3 ft · 4 ft · 4 1/4 ft · 5 1/2 ft · 7 ft

    Countershafts, eccentric and frame bushings, mainshaft nuts, feed plates, spring and U-bolts

  • Weir Warman slurry pumps

    4/3 AH · 6/4 AH · 8/6 AH · 10/8 AH · 12/10 AH · the AHP and HRM sizes

    Shaft sleeves and spacers, gland bolts and studs, bearing housing hardware, base plates

  • Komatsu Mining, P&H and Joy

    4100 and 2800 shovels · 930E and 980E haul trucks · continuous miners · draglines

    Pins and bushings, dipper and boom hardware, keys, wear plates

  • Caterpillar mining

    793 and 797 haul trucks · 994 loaders · D11 dozers · R1700 and R2900 underground loaders

    Pins and bushings, cutting edge bolts, wear bars, spacers

  • Epiroc, Atlas Copco and Sandvik drills

    Boomer · Simba · Pit Viper · SmartROC · DR410 · Ranger

    Bushings, shafts, pins, keys, plates

  • Screens, feeders and conveyors

    Metso · Terex · McLanahan and Deister screens · conveyor pulleys and idlers

    Shafts, pulley hubs and bushings, spacers, plates, U-bolts

If it's machined, cut or fabricated, we make it.

Liner and concave bolts · Frame bolts and hammer screws · Heavy nuts · Hardened washers · Studs and rod · Bronze bushings · Shafts and countershafts · Pins · Keys · Wear plates · Plates · Rings · Spacers and shims · and the rest of the machine

Mining equipment parts we make: square head liner bolt, hammer screw, hex frame bolt, heavy nut, hardened washer, threaded rod, countershaft with keyway, stepped shaft, clevis pin, roller, gib head key, parallel key, eccentric and grooved bronze bushings, wear ring, protection, wear and lifting plates, spacer and shim

Made to the standards you work to

  • Liner and frame bolts to ISO 898-1 class 8.8 and 10.9 or SAE J429 Grade 8, with material test reports
  • Bronze bushings in SAE 660 bearing bronze or C954 aluminum bronze, machined to the OEM dimensions
  • Shafts in 4140 heat treated, with ground journals and keyways to your drawing
  • Wear plates in AR400 and AR500, cut to your drawing
  • CWB certified shops for welded fabrications

Where we ship

Anywhere.

Under these agreements our parts can enter duty free, subject to rules of origin and current measures, and we document origin with every shipment.

  • United StatesCUSMA
  • MexicoCUSMA
  • European UnionCETA
  • United KingdomCanada-UK TCA
  • JapanCPTPP
  • AustraliaCPTPP
  • VietnamCPTPP
  • South KoreaCKFTA
  • ChileCCFTA
  • PeruCPFTA
  • ColombiaCCoFTA
  • Switzerland and NorwayCanada-EFTA

Send a drawing, a photo or the worn part.

We measure it, draw it and make it to the OEM dimensions in Canada. Most parts ship in 10 to 15 business days.

Get a quote

Questions

Can you make a part without the OEM drawing?

Yes. Send the worn part or a sample and we measure it and draw it, or send a sketch or photo with the main dimensions.

Do you make crusher and mill liner bolts?

Yes. Square head liner bolts, hammer screws and hex frame bolts in class 8.8, class 10.9 or Grade 8, with heavy nuts and hardened washers to match.

How large a component can you machine?

Shafts up to 6 inches in diameter and 12 feet long, rings up to 36 inches across and plate up to 3 inches thick are catalogue sizes. Larger components are made to your drawing.

Can you ship to a remote mine site?

Yes. We ship to the site or to your expeditor, and freight for large parts is quoted with the parts.

Can you expedite parts for a breakdown?

Yes. Rush orders are quoted on request; include your required date with the quote. Most parts ship in 10 to 15 business days.

What documentation comes with the parts?

A material test report with every order. Dimensional inspection reports, and parts certified and marked to a standard, are quoted on request.